|
 To Order Call - (908) 362-7692
Where rules permit & you need the latest induction technology, this should be your only choice. Our AED "Pro-Series HP" features new HP castings for 4150 style carburetors. These are absolutely the finest castings for Performance Carburetion ever produced. They allow us to achieve extremely high flow rates without sacrificing acceleration or torque. We have achieved well over 950cfm flow rates with relatively small ventura sizing which increases signal strength & fuel atomization. We have found our new Pro-Series to make more Torque & Power over a wider rpm range than anything previously obtainable. Our new Pro-Series are available in a variety of sizes & flow rates & comes with: machined throttle plates & shafts; high flow screws contained in 850 sized baseplate; fully machined, centered, & CNC ported main body to specified size (1.400"-1.600") based on application; all fuel circuits sized & calibrated per application; Our redesigned Custom Machined Boosters increase Power & Torque; screw in air correctors for all circuits; four corner idle circuits; all throttle bores Wet-Flowed to balance & correct air-fuel ratios; each carburetor is adjusted & test run before shipping. All "Pro-Series" carburetors can be calibrated for "Blow-Thru", Tunnel-Ram, Road Race, Marine, Blower, and special situations.
"Max-Pro 4150"
Top of the line 4150 is our "Max-Pro HP" which includes special Billet Annular Boosters, redesigned 3-Circuit metering, special 1:1 linkage, and all our other great Pro-Series features. This is absolutely the quickest and fastest 4150 style carburetor we have ever produced for Drag or Circle Track.
 |
"Pro-Series" Dominator |
"Pro-Series Dominator"
We also have our complete line of "Pro-Series" Dominator Carburetors available, featuring custom machined CNC HP main bodies. Dominators are available in a wide variety of throttle bore & main body sizes. All "Pro-Series" Dominators include totally redesigned fuel circuitry & air flow management. Throttle bores are centered & CNC machined to size providing exacting tolerances, consistency, & maximum airflow for throttle bore sizing. All AED Dominators now feature stainless "External 4-Position Adjustable throttle linkage". "Pro-Series" Dominators also include all other mods such as screw in air correctors, total signal balancing & flow matching, New for 2007 Billet boosters are standard, shaft machining, & all "Wet Flow" work. Options include Custom Performance Coating, machined booster holders, & Large Throttle Bore diameters.
"Max-Pro Dominator"
Our "Max-Pro" Dominator is designed for large cubic inch applications featuring up to 2.190" CNC throttle bores, venturi sizes to 1.925", billet boosters, machined booster holders, optional Performance Coating, flow rates over 1300 cfm, and all our other great Pro-Series features. This is state of the art in race carburetion and custom built per application.
"Pro-Series 500 & Max-Pro 500"
For limited induction oval track engines requiring 2-barrels, where rules don't restrict modifications, we offer the same features found in our other "Pro-Series" Carburetors. Full Porting, Flow, Balance, special boosters, & calibration. We also machine the throttle bores to accept large 1.75" machined throttle plates & shafts. Fuel circuits are totally reworked for excellent response off the corners with maximum power down the chute. We have won 5 consecutive Modified Championships with the "500 Pro-Series". Our newest addition is the "Max-Pro 500" which includes the same features as the 500 "Pro-Series" except offers a larger CNC Ported venturi with special Custom Delivery Tubes. It's very fast! | |
| |
| 500M3 | 500 "Pro-Series" Race 2-Barrel |
| MP-500 | 500 "Max-Pro" Ultimate 2-Barrel |
| 750M3 | 750 "Pro-Series" HP Race Carburetor |
| 850M3 | 850 "Pro-Series" HP Race Carburetor |
| 1050M3 | 1050 "Pro-Series" HP Dominator |
| 1150M3 | 1150 "Pro-Series" HP Dominator |
| Max-Pro | "Pro-Series" Big Inch Dominator |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
|