INNOVATE MOTORSPORTS
Digital Wideband Air/Fuel Ratio Meters
FREE SHIPPING with any kit purchase!*
We are an authorized Dealer for Innovate Motorsports.
INNOVATE MOTORSPORTS LM-2: Digital Air/Fuel Ratio Meter NEW!
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
- Patented “Direct Digital” Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
Installation and Setup: Installation of the Innovate Motorsports, LM-1 (and Auxiliary Inputs) is relatively simple. Complete documentation is supplied.
FREE SHIPPING with any Innovate Motorsports Kit purchase!*
Order yours NOW, Call (908) 362-7692
  
Part Number | | Description | Price |
GHP-3806
FREE
SHIPPING!* |  | LM-2 Digital Air/Fuel (Single Channel O2) Ratio Meter & OBD-II/CAN Scan Tool -
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!
FREE
SHIPPING!* | $479.00 |
GHP-3807
FREE
SHIPPING!* | | LM-2 Digital Air/Fuel (Dual 2 Channel O2) Ratio Meter & OBD-II/CAN Scan Tool -
The LM-2 Duo Kit (Dual Wideband O2) includes the LM-2 meter, (2) Bosch wide-band oxygen sensors, (2) 10 ft sensor cables, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, (2) weld-in bung and plug kits, LogWorks software CD, and quick-start guide. Carrying Case also included!
FREE
SHIPPING!* | $669.00 |
GHP-3765
|  | Innovate Motorsports, XD-16 Universal Digital Gauge -
Round 2 1/16" diameter and only .750" thick dash mountable gauge. The Innovate XD-16 can be used with the LM-1 or with the standalone LC-1 controller. Features programmable LED colors and remote control button to start and stop log sessions, initiate calibration, or view min/max values. The display features a 3 character central LED display, remote control button and a programmable digital needle. The body is billet aluminum bezel.
Included faces, in both black and white, are: Air/Fuel, Pressure, Temperature and blank. The blanks are included because the XD-16 can display ANY channel of data that is being recorded on the Innovate Motorsports data bus. Web-based Templates for creating custom gauge faces are available. | $229.00 |
GHP-3766
FREE
SHIPPING!* |  | Innovate Motorsports, XD-16 Standalone Gauge Kit w/ LC-1 and sensor - New for 2006! Complete kit with the LC-1 Wideband controller, Innovate Motorsports NEW XD-16 Programmable Digital Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Innovate Motorsports Software CD, and owners manual.
Round 2 1/16" diameter and only .750" thick dash mountable gauge. The display features a 3 character central LED display, remote control button and a programmable digital needle. The body is billet aluminum bezel.
Innovate Motorsports LC-1 is a complete wideband controller built into a sealed cable. It features the same award winning patented digital measurement principal found in the Innovate LM-1. | $399.00 |
 | | | |
GHP-3726 | | Innovate Motorsports, LMA-2 RPM Converter - The LMA-2 "RPM Converter" is an accessory for the LM-1, that includes a circuit for converting a tach or inductive clamp output to a clean analog signal that can be logged by the LM-1. The cable can be calibrated to the caracteristics of your engine through a simple setup routine. The LMA-2 also includes 4 additional 0-5V analog inputs for connecting external sensors. Note: Inductive clamp is sold seperatly. | $99.00 |
GHP-3744 | | Innovate Motorsports, LC-1 Cable - Standalone Wideband Controller "Lambda Cable" The LC-1 is a comple wideband controller built into a sealed cable. It features the same award winning patented digital measurement principal found in the LM-1, and includes digital input, output and 2 programmable analog outputs. The LC-1 can interface directly with most dynos, ECUs and data recorders on the market. The LC-1 can also log directly into Logworks via the Innovate MTS data bus. This enables laptop or PC-based logging directly from one or more LC-1 controllers. Since the LC-1 can be chained, users can now affordably tune individual cylinders for percision power balancing. Note: O2 Sensor not included. | $149.00 |
GHP-3769 | | Innovate Motorsports, LC-1 Cable (w/ Bosch Sensor) - Same as GHP-3744 except O2 Sensor (Bosch LSU 4.2) is also included. | $199.00 |
| | | |
GHP-3727 | | Innovate Motorsports, Inductive Clamp - For use with the RPM Converter or the AuxBox. (6ft length) | $20.00 |
GHP-3735 | | Innovate Motorsports, Bung/Plug Assembly (Steel) | $9.00 |
GHP-3736 | | Innovate Motorsports, Bung/Plug Assembly (Stainless Steel) | $9.00 |
GHP-3764 | | Innovate Motorsports,Extended Bung/Plug Assembly (Steel) - Extended Bung allows for less restriction in exhaust pipe. Especially helpful for small diameter pipes. | $12.00 |
GHP-3737 | | Innovate Motorsports, O2 Sensor (Bosch LSU 4.2) - Use with LM-1, LM-2 and XD-16. Keep an spare on hand, ready for race day! | $79.00 |
GHP-3738 | | Innovate Motorsports, Sensor Cable (10 ft.) - Connects 02 Sensor to Innovate Motorsports LM-1 box. | $20.00 |
GHP-3740 | | Innovate Motorsports, Power Cable (Cigarette Lighter) - Convienent and portable power supply to Innovate Motorsports LM-1 Box. | $12.00 |
| | | |
| | | |
Call or Email us for a complete listing of currently available Innovate Motorsports LM-1 Kits, accessories and replacement parts.
Installation and Setup
Installation of the LM-1 (and Auxiliary Inputs) is relatively simple. Complete documentation is supplied.
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
- Patented “Direct Digital” Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user. |
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
- Patented “Direct Digital” Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user. |
|
INNOVATE MOTORSPORTS LM-1 used by F.A.S.T. (Factory Appearing Stock Tire) racer, Joel Nystrom. 
Joel races his factory original 1967 Plymouth GTX in the Year One F.A.S.T. race series.
A high horsepower Hemi engine with a 4 speed trans on G-70-14 repro bias-ply tires,
makes Joel's car an awesome sight to see and hear when he rips off an 10.90 run at over 130 MPH!!
He uses the Innovate Motorsports LM1 kit from Gessler Head Porting.
After using the Innovate Motorsports LM1 Wideband Air/Fuel Ratio Meter, Joel wrote the following to us:
"With 2 Carter 4 barrels, 8 main jets and 4 metering rods, the 426 Hemi has always been a bear to tune for weather changes. The LM1 really helps keep the tune optimized, and saves time by eliminating unnecessary experimental jet changes. I recommend it to anyone who wants to optimize the tune on their car."
Joel Nystrom
* Free shipping to Continental USA, 48 states. |