|
 | x
BUICK 400 430 455
EDELBROCK
ALUMINUM CYLINDER HEADS |
To Order Call - (908) 362-7692 |
XX
xx
| LEVEL 1 - Edelbrock Aluminum Performer RPM - Stage 1 | $1839.00 (pair) |
The Edelbrock head (#60049) is a high quality head with excellent machining details. This fully assembled, ready to run head is set up with 68cc combustion chambers and includes Edelbrock's bowl blending and assembly. This head accepts widely available small-block Chevy adjustable rockers.
.Ready to run, fully machined and assembled by Edelbrock. For more info on these heads click here: EDELBROCK ALUMINUM HEADS.
NEW PARTS include New Aluminum Edelbrock Performer RPM Stage1 cylinder heads (#60049), one piece stainless steel ,11/32" stem, swirl polished 2.13"-1.75" valves, bronze valve guides, 120 lb valve springs, valve locks, retainers, guide plates, studs and valve stem seals.
Recommended for a solid increase in horsepower over stock cast iron heads. Edelbrock Buick Performer RPM heads included bowl blending and small-block Chevy rocker studs. Making these heads a great 'out-of-the box' value for performance dollars spent.
| LEVEL 2 - Edelbrock Aluminum Performer RPM - Stage 1 | $2375.00 (pair) |
Includes Level 1 plus: Intake, Exhaust port and combustion chamber is modified for increased horsepower and air flow. Valves are back cut with proper angle to work with these heads.
Recommended for a cost effective increase in flow thruout the .100" - .600" lift range. This head produces great flow with excellent intake port velocity.
* Free shipping to Continental USA, 48 states.
EDELBROCK BUICK CYLINDER HEAD ACCESSORIES:
Edelbrock heads require several non-standard Buick parts such as :
Rocker Arms-
xxx GHP-3460 1.6 ratio Stamped steel rocker arm kit.
xxx GHP-3461 1.6 ratio Aluminum roller tip rocker arm kit.
xxx GHP-3462 1.6 ratio Stainless steel roller tip rocker arm kit.
xxx GHP-3463 1.6 ratio Roller Tip - Stamped steel rocker arm kit.xxx
Pushrods- 3/8" diameter guideplate compatible pushrods required, approximate length is 9.650".
xxx GHP Strongly recommends delaying the purchase of pushrods until after determining proper pushrod length for your engine.
xxx Use a pushrod length checking tool to determine actual required length.
xxx GHP-3520 Pushrod length checking tool. Easy to use, graduated tool allows use with out need for expensive dial caliper.
xxx GHP has custom length pushrods available.
xxx Detailed instructions on determining correct pushrod geometry.
Intake manifold mounting bolts- Edelbrock heads do not accept stock Buick 455 intake manifold bolts.
GHP-5300 Flanged head, grade-8, Intake manifold bolt kit for Edelbrock heads.
Spark Plugs- Good street plugs for Edelbrock heads.
GHP-4701 Champion Copper Plus Spark Plugs
xxEDELBROCK REPLACEMENT PARTS:
We carry parts for the Edelbrock Buick Heads:
Guide Plates-
Valves-
Rocker Studs-
Valve Springs-
Valve Retainers-
Spring Seats-
xxx
Flow testing Edelbrock Performer RPM cylinder heads part # 60049 & 60039. | |
XX
| | 
Edelbrock #60049 Buick Performer RPM cylinder heads, ported and flow tested, ready for shipment. |
| |
|
|
|
|